Фото | Назва | Виробник | Інформація |
Доступність |
Ціна без ПДВ |
||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TCT-700 | GOLDTOOL |
Category: LAN and Telephone Networks Testers Description: Tester: wiring system; LEDs; 500÷781Hz Type of tester: wiring system Kind of display used: LEDs Signal frequency: 500...781Hz Detection: cable and wire continuity; cables in walls Interface: BNC, RJ45 ( transmitter) Power supply: battery 6F22 9V x2 Measuring instrument features: adjustable volume control; alligator clips to connect open wires and for direct connection of internet and telephone cables; automatic power-off; check lines polarization; LED signal strength indication; maximum test cable length of 1000m; possibility of headphones connection Standard equipment: BNC adapter; BNC terminator; case Test: circuit continuity; wiring BNC; wiring RJ45 |
на замовлення 1 шт: термін постачання 21-30 дні (днів) |
|
|||||||||
TCT-1620 | GOLDTOOL |
Category: LAN and Telephone Networks Testers Description: Tester: LAN wiring; LEDs; Measured cable l: max.180m Type of tester: LAN wiring Kind of display used: LEDs Detection: shielded and non-shielded cables Measured cable length: max. 180m Power supply: battery 6F22 9V x1 Body dimensions: 100x25x185mm Measuring instrument features: can measure cables with length up to 180m (not applicable to FireWire and USB); connection map test: discontinuity, short circuit, crossed pairs; continuity and wire configuration test; low battery indicator; sound signaller Standard equipment: 3 test leads with RJ45, RJ12, BNC connectors; BNC terminator; case Test: wiring 1394 FireWire; wiring BNC; wiring RJ12; wiring RJ45; wiring USB кількість в упаковці: 1 шт |
на замовлення 14 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
TCT-2210 | GOLDTOOL |
Category: LAN and Telephone Networks Testers Description: Tester: LAN wiring; LEDs; 95x30x165mm Type of tester: LAN wiring Kind of display used: LEDs Detection: shielded and non-shielded cables Power supply: battery 6F22 9V x1 Body dimensions: 95x30x165mm Measuring instrument features: adapter for remote measurements; connection map test: discontinuity, short circuit, reversed pairs, crossed pairs; low battery indicator Standard equipment: BNC terminator; case Test: cables STP; cables UTP; circuit continuity; wiring BNC; wiring RJ45 кількість в упаковці: 1 шт |
на замовлення 9 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
TCT-2690PRO | GOLDTOOL |
Category: LAN and Telephone Networks Testers Description: Tester: LAN wiring / conductor detector; LCD; F,RJ12,RJ45 Type of tester: LAN wiring / conductor detector Kind of display used: LCD Detection: cable and wire continuity; cables in walls; cross-talk interference; discontinuities and short circuits in conductors; place of cable failure; reversed connection; split pairs Measurement: cable length; continuity Kind of connector: F; RJ12; RJ45 Power supply: battery 6F22 9V x1 Operating temperature: 0...50°C Measuring instrument features: automatic power-off; checks correctness of telephone line connections; continuity and wire configuration test; identyfication of pairs; indicates incorrect connection of test leads; low battery indicator; sound signaller Standard equipment: BNC adapter - 2 pcs; case Test: cables STP; cables UTP Illumination: yes кількість в упаковці: 1 шт |
на замовлення 15 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
TCT-680 | GOLDTOOL |
Category: LAN and Telephone Networks Testers Description: Tester: LAN wiring / conductor detector; LEDs; Rec.sensit: 30dB Type of tester: LAN wiring / conductor detector Kind of display used: LEDs Detection: cable and wire continuity; cables in walls; place of cable failure Interface: RJ12, RJ45 ( transmitter); RJ45, Jack (receiver) Protection: anti-overvoltage OVP Power supply: battery 6F22 9V x2 Measuring instrument features: checks correctness of telephone line connections; identifies conductor in group of conductors and identifies cable terminations; identifies state of operating telephone line; indication; low battery indicator; possibility of headphones connection; sound signaller; voltage supply for inactive telephone line Standard equipment: 2 replaceable tips for probe; case Receiver sensitivity: 30dB кількість в упаковці: 1 шт |
на замовлення 12 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
TCT-700 | GOLDTOOL |
Category: LAN and Telephone Networks Testers Description: Tester: wiring system; LEDs; 500÷781Hz Type of tester: wiring system Kind of display used: LEDs Signal frequency: 500...781Hz Detection: cable and wire continuity; cables in walls Interface: BNC, RJ45 ( transmitter) Power supply: battery 6F22 9V x2 Measuring instrument features: adjustable volume control; alligator clips to connect open wires and for direct connection of internet and telephone cables; automatic power-off; check lines polarization; LED signal strength indication; maximum test cable length of 1000m; possibility of headphones connection Standard equipment: BNC adapter; BNC terminator; case Test: circuit continuity; wiring BNC; wiring RJ45 кількість в упаковці: 1 шт |
на замовлення 1 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
TG-206 | GOLDTOOL |
Category: Screwdrivers Description: Screwdriver; Torx®; TX06; 50mm Type of tool: screwdriver Kind of bit: Torx® Bit size: TX06 Blade length: 50mm Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle Handle material: polypropylene |
на замовлення 43 шт: термін постачання 21-30 дні (днів) |
|
|||||||||
TG-208 | GOLDTOOL |
Category: Screwdrivers Description: Screwdriver; Torx®; TX08; 80mm Type of tool: screwdriver Kind of bit: Torx® Bit size: TX08 Blade length: 80mm Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle Handle material: polypropylene |
на замовлення 135 шт: термін постачання 21-30 дні (днів) |
|
|||||||||
TG-210 | GOLDTOOL |
Category: Screwdrivers Description: Screwdriver; Torx®; TX10; 80mm Type of tool: screwdriver Kind of bit: Torx® Bit size: TX10 Blade length: 80mm Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle Handle material: polypropylene |
на замовлення 16 шт: термін постачання 21-30 дні (днів) |
|
|||||||||
TG-42 | GOLDTOOL |
Category: Screwdrivers Description: Screwdriver; Phillips; PH2; 100mm Type of tool: screwdriver Kind of bit: Phillips Bit size: PH2 Blade length: 100mm Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle Handle material: polypropylene |
на замовлення 37 шт: термін постачання 21-30 дні (днів) |
|
|||||||||
TG-03 | GOLDTOOL | TG-03 Screwdrivers |
на замовлення 101 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
TG-04A | GOLDTOOL | TG-04A Screwdrivers |
на замовлення 29 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
TG-06 | GOLDTOOL | TG-06 Screwdrivers |
на замовлення 79 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
TG-206 | GOLDTOOL |
Category: Screwdrivers Description: Screwdriver; Torx®; TX06; 50mm Type of tool: screwdriver Kind of bit: Torx® Bit size: TX06 Blade length: 50mm Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle Handle material: polypropylene кількість в упаковці: 1 шт |
на замовлення 43 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
TG-208 | GOLDTOOL |
Category: Screwdrivers Description: Screwdriver; Torx®; TX08; 80mm Type of tool: screwdriver Kind of bit: Torx® Bit size: TX08 Blade length: 80mm Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle Handle material: polypropylene кількість в упаковці: 1 шт |
на замовлення 135 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
TG-210 | GOLDTOOL |
Category: Screwdrivers Description: Screwdriver; Torx®; TX10; 80mm Type of tool: screwdriver Kind of bit: Torx® Bit size: TX10 Blade length: 80mm Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle Handle material: polypropylene кількість в упаковці: 1 шт |
на замовлення 16 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
TG-215 | GOLDTOOL | TG-215 Screwdrivers |
на замовлення 13 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
TG-220 | GOLDTOOL | TG-220 Screwdrivers |
на замовлення 168 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
TG-30 | GOLDTOOL | TG-30 Screwdrivers |
на замовлення 143 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
TG-31 | GOLDTOOL | TG-31 Screwdrivers |
на замовлення 116 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
TG-42 | GOLDTOOL |
Category: Screwdrivers Description: Screwdriver; Phillips; PH2; 100mm Type of tool: screwdriver Kind of bit: Phillips Bit size: PH2 Blade length: 100mm Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle Handle material: polypropylene кількість в упаковці: 1 шт |
на замовлення 37 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
THR-001 | GOLDTOOL |
Category: Reamers Description: Taper reamer; Tool length: 125mm; Working part len: 80mm Tools features: cylindrical grip, diameter 12.2 mm, with hole for cotter; designed for continuous enlarging of hole diameters; enlarging of hole diameters in metal and plastic elements Tool length: 125mm Working part length: 80mm Reamed hole diameter: 3.5...12.5mm Type of tool: Taper reamer |
на замовлення 15 шт: термін постачання 21-30 дні (днів) |
|
|||||||||
THR-066 | GOLDTOOL |
Category: General Purpose Tools - Others Description: Oiler; Tank capacity: 5ml; 140mm; aluminium Type of tool: oiler Tank capacity: 5ml Length: 140mm Material: aluminium Colour: silver |
на замовлення 1 шт: термін постачання 21-30 дні (днів) |
|
|||||||||
THR-075 | GOLDTOOL |
Category: General Purpose Tools - Others Description: Scriber; Ø: 2mm; L: 148mm; stainless steel Length: 148mm Diameter: 2mm Material: stainless steel Tools features: automatic pulling out; pen-like body Type of tool: scriber |
на замовлення 25 шт: термін постачання 21-30 дні (днів) |
|
|||||||||
THR-450 | GOLDTOOL |
Category: General Purpose Tools - Others Description: Engineer's scribers; 180mm; steel Type of tool: engineer's scribers Material: steel Length: 180mm Soldering equipment features: two tips, straight and right angle |
на замовлення 62 шт: термін постачання 21-30 дні (днів) |
|
|||||||||
THR-001 | GOLDTOOL |
Category: Reamers Description: Taper reamer; Tool length: 125mm; Working part len: 80mm Tools features: cylindrical grip, diameter 12.2 mm, with hole for cotter; designed for continuous enlarging of hole diameters; enlarging of hole diameters in metal and plastic elements Tool length: 125mm Working part length: 80mm Reamed hole diameter: 3.5...12.5mm Type of tool: Taper reamer |
на замовлення 15 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
THR-062 | GOLDTOOL | GTR-062 General Purpose Tools - Others |
на замовлення 94 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
THR-066 | GOLDTOOL |
Category: General Purpose Tools - Others Description: Oiler; Tank capacity: 5ml; 140mm; aluminium Type of tool: oiler Tank capacity: 5ml Length: 140mm Material: aluminium Colour: silver кількість в упаковці: 1 шт |
на замовлення 1 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
THR-075 | GOLDTOOL |
Category: General Purpose Tools - Others Description: Scriber; Ø: 2mm; L: 148mm; stainless steel Length: 148mm Diameter: 2mm Material: stainless steel Tools features: automatic pulling out; pen-like body Type of tool: scriber кількість в упаковці: 1 шт |
на замовлення 25 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
THR-450 | GOLDTOOL |
Category: General Purpose Tools - Others Description: Engineer's scribers; 180mm; steel Type of tool: engineer's scribers Material: steel Length: 180mm Soldering equipment features: two tips, straight and right angle кількість в упаковці: 1 шт |
на замовлення 62 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
TO-SA11 | GOLDTOOL |
Category: Various soldering tools Description: Kit: scrapers and brushes; 180mm; 7pcs. Type of tools set: scrapers and brushes Tool length: 180mm Quantity in set/package: 7pcs. Standard equipment: 3 double sided tools for preparation and correction of soldered connections and for cleaning of PCBs after soldering; 100 ml container with dispenser for cleaning agents or flux; brush ESD; desoldering braid 2mm x 1,5m; pliers for heat dissipation while soldering, to prevent component overheating |
на замовлення 89 шт: термін постачання 21-30 дні (днів) |
|
|||||||||
TO-SA11 | GOLDTOOL |
Category: Various soldering tools Description: Kit: scrapers and brushes; 180mm; 7pcs. Type of tools set: scrapers and brushes Tool length: 180mm Quantity in set/package: 7pcs. Standard equipment: 3 double sided tools for preparation and correction of soldered connections and for cleaning of PCBs after soldering; 100 ml container with dispenser for cleaning agents or flux; brush ESD; desoldering braid 2mm x 1,5m; pliers for heat dissipation while soldering, to prevent component overheating кількість в упаковці: 1 шт |
на замовлення 89 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
TTK-055 | GOLDTOOL |
Category: Strippers for wire & cable Description: Stripping tool; Øcable: 0.26÷8mm; Wire: round,flat; 125mm; STP,UTP Type of tool: stripping tool Cable external diameter: 0.26...8mm Kind of stripping wire: flat; round Length: 125mm Tool material: plastic Stripping tool features: a tool structure enables fastening it as a self-locking clip; cutting blade position is adjustable; fitted with spare blades; insulation is cut after the tool rotates several times around the cable axis Kind of wire: STP; UTP |
на замовлення 22 шт: термін постачання 21-30 дні (днів) |
|
|||||||||
+4 |
TTK-453 | GOLDTOOL |
Category: Crimping Tools for Terminals Description: Tool: for crimping; insulated connectors,insulated terminals Length: 0.25m Wire cross-section: 0.5...6mm2 Wire size: 20AWG...10AWG Type of tool: for crimping Crimp tool application: insulated connectors; insulated terminals Crimp tool features: elongated handles enable operation with both hands; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle |
на замовлення 16 шт: термін постачання 21-30 дні (днів) |
|
||||||||
TTK-468 | GOLDTOOL |
Category: Crimping Tools for RJ Plugs Description: Tool: for crimping Type of tool: for crimping Length: 195mm Crimp tool application: RJ9 (4p4c) connectors; RJ11 (6p4c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors Tool material: steel Crimp tool features: 3 interchangeable crimping dies; blackened tool; cable cutting and stripping; ergonomic pads on handles; fitted with return spring; fitted with stripped insulation distance limiter and blade protection; jaw opening interlock |
на замовлення 22 шт: термін постачання 21-30 дні (днів) |
|
|||||||||
TTK-508 | GOLDTOOL |
Category: Crimping Tools for RJ Plugs Description: Tool: for crimping Type of tool: for crimping Length: 0.2m Crimp tool features: blackened tool; cutting and stripping flat cables; hardened tools; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle Tool material: carbon steel Crimp tool application: RJ11 (6p4c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors |
на замовлення 65 шт: термін постачання 21-30 дні (днів) |
|
|||||||||
+3 |
TTK-742 | GOLDTOOL |
Category: Cutting Pliers Description: Pliers; cutting; blackened tool,PVC coated handles; 230mm Type of tool: pliers Pliers length: 230mm Kind of pliers: cutting Cutting range: aluminium cable 70mm2; coper wire 16mm2; copper cable 70mm2 Oblique pliers/knives features: blackened tool; PVC coated handles Pliers/knives application: for cutting large diameter copper and aluminium cables |
на замовлення 6 шт: термін постачання 21-30 дні (днів) |
|
||||||||
TTK-055 | GOLDTOOL |
Category: Strippers for wire & cable Description: Stripping tool; Øcable: 0.26÷8mm; Wire: round,flat; 125mm; STP,UTP Type of tool: stripping tool Cable external diameter: 0.26...8mm Kind of stripping wire: flat; round Length: 125mm Tool material: plastic Stripping tool features: a tool structure enables fastening it as a self-locking clip; cutting blade position is adjustable; fitted with spare blades; insulation is cut after the tool rotates several times around the cable axis Kind of wire: STP; UTP |
на замовлення 22 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
+4 |
TTK-453 | GOLDTOOL |
Category: Crimping Tools for Terminals Description: Tool: for crimping; insulated connectors,insulated terminals Length: 0.25m Wire cross-section: 0.5...6mm2 Wire size: 20AWG...10AWG Type of tool: for crimping Crimp tool application: insulated connectors; insulated terminals Crimp tool features: elongated handles enable operation with both hands; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle кількість в упаковці: 1 шт |
на замовлення 16 шт: термін постачання 7-14 дні (днів) |
|
||||||||
TTK-468 | GOLDTOOL |
Category: Crimping Tools for RJ Plugs Description: Tool: for crimping Type of tool: for crimping Length: 195mm Crimp tool application: RJ9 (4p4c) connectors; RJ11 (6p4c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors Tool material: steel Crimp tool features: 3 interchangeable crimping dies; blackened tool; cable cutting and stripping; ergonomic pads on handles; fitted with return spring; fitted with stripped insulation distance limiter and blade protection; jaw opening interlock кількість в упаковці: 1 шт |
на замовлення 22 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
TTK-508 | GOLDTOOL |
Category: Crimping Tools for RJ Plugs Description: Tool: for crimping Type of tool: for crimping Length: 0.2m Crimp tool features: blackened tool; cutting and stripping flat cables; hardened tools; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle Tool material: carbon steel Crimp tool application: RJ11 (6p4c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors кількість в упаковці: 1 шт |
на замовлення 65 шт: термін постачання 7-14 дні (днів) |
|
|||||||||
+3 |
TTK-742 | GOLDTOOL |
Category: Cutting Pliers Description: Pliers; cutting; blackened tool,PVC coated handles; 230mm Type of tool: pliers Pliers length: 230mm Kind of pliers: cutting Cutting range: aluminium cable 70mm2; coper wire 16mm2; copper cable 70mm2 Oblique pliers/knives features: blackened tool; PVC coated handles Pliers/knives application: for cutting large diameter copper and aluminium cables кількість в упаковці: 1 шт |
на замовлення 6 шт: термін постачання 7-14 дні (днів) |
|
||||||||
+1 |
Бокорізи GTH-155 (GPL-155) Код товару: 118132 |
GOLDTOOL |
Інструмент > Бокорізи, кусачки, кліщі, щипці, плоскогубці, круглогубці, пасатижі, затискачі Тип: Бокорізи, кусачки Опис: Щипці Бокорізи, для різання, довжина інструмента: 125мм, матеріал: сталь, діапазон різання: дроти 0,08-1,2мм, губки шліфовані, різко звужуються, без фаски, поворотна пружина, застосовуються для прецизійних робіт в електроніці та електротехніці |
у наявності: 40 шт
|
|
||||||||
Бокорезы GTH-231 Код товару: 118133 |
GOLDTOOL |
Інструмент > Бокорізи, кусачки, кліщі, щипці, плоскогубці, круглогубці, пасатижі, затискачі Тип: Бокорезы, кусачки Опис: Щипцы бокорезы, для резки, длина инструмента: 115мм, материал: сталь, диапазон резки: медная проволока, алюминиевая и проволока из мягкой стали диаметром до 1,2мм, овальные губки, режущие кромки с фаской |
товар відсутній
|
||||||||||
Зачистка изоляции (стиппер) GT-055 Код товару: 117968 |
GOLDTOOL |
Інструмент > Інструмент для зачистки та обрізки кабелю Тип: Для зачистки Опис: Стриппер, вид зачищаемого провода: круглый, плоский, диаметр провода: 0.26...8мм, вид кабеля: STP, UTP, материал: пластмасса |
товар відсутній
|
||||||||||
Щипцы-круглогубцы GTH-193 Код товару: 117915 |
GOLDTOOL |
Інструмент > Бокорізи, кусачки, кліщі, щипці, плоскогубці, круглогубці, пасатижі, затискачі Тип: Щипцы-круглогубцы Опис: Щипцы-круглогубцы, с удлиненными губками, длина инструмента: 140мм, длина рабочей части: 35мм, гладкие зажимные поверхности, возвратная пружина |
товар відсутній
|
||||||||||
Щипцы-круглогубцы GTH-262 Код товару: 117916 |
GOLDTOOL |
Інструмент > Бокорізи, кусачки, кліщі, щипці, плоскогубці, круглогубці, пасатижі, затискачі Тип: Щипцы-круглогубцы Опис: Щипцы-круглогубцы, длина инструмента: 140мм, для захвата и резки, прецизионные, зажимные поверхности с поперечным рифлением, возвратная пружина |
товар відсутній
|
TCT-700 |
Виробник: GOLDTOOL
Category: LAN and Telephone Networks Testers
Description: Tester: wiring system; LEDs; 500÷781Hz
Type of tester: wiring system
Kind of display used: LEDs
Signal frequency: 500...781Hz
Detection: cable and wire continuity; cables in walls
Interface: BNC, RJ45 ( transmitter)
Power supply: battery 6F22 9V x2
Measuring instrument features: adjustable volume control; alligator clips to connect open wires and for direct connection of internet and telephone cables; automatic power-off; check lines polarization; LED signal strength indication; maximum test cable length of 1000m; possibility of headphones connection
Standard equipment: BNC adapter; BNC terminator; case
Test: circuit continuity; wiring BNC; wiring RJ45
Category: LAN and Telephone Networks Testers
Description: Tester: wiring system; LEDs; 500÷781Hz
Type of tester: wiring system
Kind of display used: LEDs
Signal frequency: 500...781Hz
Detection: cable and wire continuity; cables in walls
Interface: BNC, RJ45 ( transmitter)
Power supply: battery 6F22 9V x2
Measuring instrument features: adjustable volume control; alligator clips to connect open wires and for direct connection of internet and telephone cables; automatic power-off; check lines polarization; LED signal strength indication; maximum test cable length of 1000m; possibility of headphones connection
Standard equipment: BNC adapter; BNC terminator; case
Test: circuit continuity; wiring BNC; wiring RJ45
на замовлення 1 шт:
термін постачання 21-30 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 5942.66 грн |
TCT-1620 |
Виробник: GOLDTOOL
Category: LAN and Telephone Networks Testers
Description: Tester: LAN wiring; LEDs; Measured cable l: max.180m
Type of tester: LAN wiring
Kind of display used: LEDs
Detection: shielded and non-shielded cables
Measured cable length: max. 180m
Power supply: battery 6F22 9V x1
Body dimensions: 100x25x185mm
Measuring instrument features: can measure cables with length up to 180m (not applicable to FireWire and USB); connection map test: discontinuity, short circuit, crossed pairs; continuity and wire configuration test; low battery indicator; sound signaller
Standard equipment: 3 test leads with RJ45, RJ12, BNC connectors; BNC terminator; case
Test: wiring 1394 FireWire; wiring BNC; wiring RJ12; wiring RJ45; wiring USB
кількість в упаковці: 1 шт
Category: LAN and Telephone Networks Testers
Description: Tester: LAN wiring; LEDs; Measured cable l: max.180m
Type of tester: LAN wiring
Kind of display used: LEDs
Detection: shielded and non-shielded cables
Measured cable length: max. 180m
Power supply: battery 6F22 9V x1
Body dimensions: 100x25x185mm
Measuring instrument features: can measure cables with length up to 180m (not applicable to FireWire and USB); connection map test: discontinuity, short circuit, crossed pairs; continuity and wire configuration test; low battery indicator; sound signaller
Standard equipment: 3 test leads with RJ45, RJ12, BNC connectors; BNC terminator; case
Test: wiring 1394 FireWire; wiring BNC; wiring RJ12; wiring RJ45; wiring USB
кількість в упаковці: 1 шт
на замовлення 14 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 5145.19 грн |
TCT-2210 |
Виробник: GOLDTOOL
Category: LAN and Telephone Networks Testers
Description: Tester: LAN wiring; LEDs; 95x30x165mm
Type of tester: LAN wiring
Kind of display used: LEDs
Detection: shielded and non-shielded cables
Power supply: battery 6F22 9V x1
Body dimensions: 95x30x165mm
Measuring instrument features: adapter for remote measurements; connection map test: discontinuity, short circuit, reversed pairs, crossed pairs; low battery indicator
Standard equipment: BNC terminator; case
Test: cables STP; cables UTP; circuit continuity; wiring BNC; wiring RJ45
кількість в упаковці: 1 шт
Category: LAN and Telephone Networks Testers
Description: Tester: LAN wiring; LEDs; 95x30x165mm
Type of tester: LAN wiring
Kind of display used: LEDs
Detection: shielded and non-shielded cables
Power supply: battery 6F22 9V x1
Body dimensions: 95x30x165mm
Measuring instrument features: adapter for remote measurements; connection map test: discontinuity, short circuit, reversed pairs, crossed pairs; low battery indicator
Standard equipment: BNC terminator; case
Test: cables STP; cables UTP; circuit continuity; wiring BNC; wiring RJ45
кількість в упаковці: 1 шт
на замовлення 9 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 5347.28 грн |
TCT-2690PRO |
Виробник: GOLDTOOL
Category: LAN and Telephone Networks Testers
Description: Tester: LAN wiring / conductor detector; LCD; F,RJ12,RJ45
Type of tester: LAN wiring / conductor detector
Kind of display used: LCD
Detection: cable and wire continuity; cables in walls; cross-talk interference; discontinuities and short circuits in conductors; place of cable failure; reversed connection; split pairs
Measurement: cable length; continuity
Kind of connector: F; RJ12; RJ45
Power supply: battery 6F22 9V x1
Operating temperature: 0...50°C
Measuring instrument features: automatic power-off; checks correctness of telephone line connections; continuity and wire configuration test; identyfication of pairs; indicates incorrect connection of test leads; low battery indicator; sound signaller
Standard equipment: BNC adapter - 2 pcs; case
Test: cables STP; cables UTP
Illumination: yes
кількість в упаковці: 1 шт
Category: LAN and Telephone Networks Testers
Description: Tester: LAN wiring / conductor detector; LCD; F,RJ12,RJ45
Type of tester: LAN wiring / conductor detector
Kind of display used: LCD
Detection: cable and wire continuity; cables in walls; cross-talk interference; discontinuities and short circuits in conductors; place of cable failure; reversed connection; split pairs
Measurement: cable length; continuity
Kind of connector: F; RJ12; RJ45
Power supply: battery 6F22 9V x1
Operating temperature: 0...50°C
Measuring instrument features: automatic power-off; checks correctness of telephone line connections; continuity and wire configuration test; identyfication of pairs; indicates incorrect connection of test leads; low battery indicator; sound signaller
Standard equipment: BNC adapter - 2 pcs; case
Test: cables STP; cables UTP
Illumination: yes
кількість в упаковці: 1 шт
на замовлення 15 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 10414.67 грн |
3+ | 9656.43 грн |
TCT-680 |
Виробник: GOLDTOOL
Category: LAN and Telephone Networks Testers
Description: Tester: LAN wiring / conductor detector; LEDs; Rec.sensit: 30dB
Type of tester: LAN wiring / conductor detector
Kind of display used: LEDs
Detection: cable and wire continuity; cables in walls; place of cable failure
Interface: RJ12, RJ45 ( transmitter); RJ45, Jack (receiver)
Protection: anti-overvoltage OVP
Power supply: battery 6F22 9V x2
Measuring instrument features: checks correctness of telephone line connections; identifies conductor in group of conductors and identifies cable terminations; identifies state of operating telephone line; indication; low battery indicator; possibility of headphones connection; sound signaller; voltage supply for inactive telephone line
Standard equipment: 2 replaceable tips for probe; case
Receiver sensitivity: 30dB
кількість в упаковці: 1 шт
Category: LAN and Telephone Networks Testers
Description: Tester: LAN wiring / conductor detector; LEDs; Rec.sensit: 30dB
Type of tester: LAN wiring / conductor detector
Kind of display used: LEDs
Detection: cable and wire continuity; cables in walls; place of cable failure
Interface: RJ12, RJ45 ( transmitter); RJ45, Jack (receiver)
Protection: anti-overvoltage OVP
Power supply: battery 6F22 9V x2
Measuring instrument features: checks correctness of telephone line connections; identifies conductor in group of conductors and identifies cable terminations; identifies state of operating telephone line; indication; low battery indicator; possibility of headphones connection; sound signaller; voltage supply for inactive telephone line
Standard equipment: 2 replaceable tips for probe; case
Receiver sensitivity: 30dB
кількість в упаковці: 1 шт
на замовлення 12 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 8017.34 грн |
TCT-700 |
Виробник: GOLDTOOL
Category: LAN and Telephone Networks Testers
Description: Tester: wiring system; LEDs; 500÷781Hz
Type of tester: wiring system
Kind of display used: LEDs
Signal frequency: 500...781Hz
Detection: cable and wire continuity; cables in walls
Interface: BNC, RJ45 ( transmitter)
Power supply: battery 6F22 9V x2
Measuring instrument features: adjustable volume control; alligator clips to connect open wires and for direct connection of internet and telephone cables; automatic power-off; check lines polarization; LED signal strength indication; maximum test cable length of 1000m; possibility of headphones connection
Standard equipment: BNC adapter; BNC terminator; case
Test: circuit continuity; wiring BNC; wiring RJ45
кількість в упаковці: 1 шт
Category: LAN and Telephone Networks Testers
Description: Tester: wiring system; LEDs; 500÷781Hz
Type of tester: wiring system
Kind of display used: LEDs
Signal frequency: 500...781Hz
Detection: cable and wire continuity; cables in walls
Interface: BNC, RJ45 ( transmitter)
Power supply: battery 6F22 9V x2
Measuring instrument features: adjustable volume control; alligator clips to connect open wires and for direct connection of internet and telephone cables; automatic power-off; check lines polarization; LED signal strength indication; maximum test cable length of 1000m; possibility of headphones connection
Standard equipment: BNC adapter; BNC terminator; case
Test: circuit continuity; wiring BNC; wiring RJ45
кількість в упаковці: 1 шт
на замовлення 1 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 7131.19 грн |
TG-206 |
Виробник: GOLDTOOL
Category: Screwdrivers
Description: Screwdriver; Torx®; TX06; 50mm
Type of tool: screwdriver
Kind of bit: Torx®
Bit size: TX06
Blade length: 50mm
Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle
Handle material: polypropylene
Category: Screwdrivers
Description: Screwdriver; Torx®; TX06; 50mm
Type of tool: screwdriver
Kind of bit: Torx®
Bit size: TX06
Blade length: 50mm
Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle
Handle material: polypropylene
на замовлення 43 шт:
термін постачання 21-30 дні (днів)Кількість | Ціна без ПДВ |
---|---|
4+ | 86.49 грн |
10+ | 76.8 грн |
TG-208 |
Виробник: GOLDTOOL
Category: Screwdrivers
Description: Screwdriver; Torx®; TX08; 80mm
Type of tool: screwdriver
Kind of bit: Torx®
Bit size: TX08
Blade length: 80mm
Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle
Handle material: polypropylene
Category: Screwdrivers
Description: Screwdriver; Torx®; TX08; 80mm
Type of tool: screwdriver
Kind of bit: Torx®
Bit size: TX08
Blade length: 80mm
Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle
Handle material: polypropylene
на замовлення 135 шт:
термін постачання 21-30 дні (днів)Кількість | Ціна без ПДВ |
---|---|
4+ | 87.18 грн |
10+ | 80.26 грн |
TG-210 |
Виробник: GOLDTOOL
Category: Screwdrivers
Description: Screwdriver; Torx®; TX10; 80mm
Type of tool: screwdriver
Kind of bit: Torx®
Bit size: TX10
Blade length: 80mm
Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle
Handle material: polypropylene
Category: Screwdrivers
Description: Screwdriver; Torx®; TX10; 80mm
Type of tool: screwdriver
Kind of bit: Torx®
Bit size: TX10
Blade length: 80mm
Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle
Handle material: polypropylene
на замовлення 16 шт:
термін постачання 21-30 дні (днів)Кількість | Ціна без ПДВ |
---|---|
3+ | 141.58 грн |
4+ | 107.94 грн |
9+ | 94.8 грн |
TG-42 |
Виробник: GOLDTOOL
Category: Screwdrivers
Description: Screwdriver; Phillips; PH2; 100mm
Type of tool: screwdriver
Kind of bit: Phillips
Bit size: PH2
Blade length: 100mm
Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle
Handle material: polypropylene
Category: Screwdrivers
Description: Screwdriver; Phillips; PH2; 100mm
Type of tool: screwdriver
Kind of bit: Phillips
Bit size: PH2
Blade length: 100mm
Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle
Handle material: polypropylene
на замовлення 37 шт:
термін постачання 21-30 дні (днів)Кількість | Ціна без ПДВ |
---|---|
2+ | 216.84 грн |
3+ | 163.99 грн |
6+ | 138.39 грн |
17+ | 130.78 грн |
TG-03 |
Виробник: GOLDTOOL
TG-03 Screwdrivers
TG-03 Screwdrivers
на замовлення 101 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
2+ | 155.59 грн |
10+ | 99.64 грн |
27+ | 94.66 грн |
TG-04A |
Виробник: GOLDTOOL
TG-04A Screwdrivers
TG-04A Screwdrivers
на замовлення 29 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
2+ | 164.53 грн |
10+ | 104.62 грн |
26+ | 98.81 грн |
TG-06 |
Виробник: GOLDTOOL
TG-06 Screwdrivers
TG-06 Screwdrivers
на замовлення 79 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
2+ | 137.71 грн |
11+ | 88.01 грн |
31+ | 83.03 грн |
TG-206 |
Виробник: GOLDTOOL
Category: Screwdrivers
Description: Screwdriver; Torx®; TX06; 50mm
Type of tool: screwdriver
Kind of bit: Torx®
Bit size: TX06
Blade length: 50mm
Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle
Handle material: polypropylene
кількість в упаковці: 1 шт
Category: Screwdrivers
Description: Screwdriver; Torx®; TX06; 50mm
Type of tool: screwdriver
Kind of bit: Torx®
Bit size: TX06
Blade length: 50mm
Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle
Handle material: polypropylene
кількість в упаковці: 1 шт
на замовлення 43 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
2+ | 139.49 грн |
3+ | 107.78 грн |
10+ | 92.17 грн |
TG-208 |
Виробник: GOLDTOOL
Category: Screwdrivers
Description: Screwdriver; Torx®; TX08; 80mm
Type of tool: screwdriver
Kind of bit: Torx®
Bit size: TX08
Blade length: 80mm
Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle
Handle material: polypropylene
кількість в упаковці: 1 шт
Category: Screwdrivers
Description: Screwdriver; Torx®; TX08; 80mm
Type of tool: screwdriver
Kind of bit: Torx®
Bit size: TX08
Blade length: 80mm
Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle
Handle material: polypropylene
кількість в упаковці: 1 шт
на замовлення 135 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
2+ | 141.28 грн |
3+ | 108.64 грн |
10+ | 96.32 грн |
TG-210 |
Виробник: GOLDTOOL
Category: Screwdrivers
Description: Screwdriver; Torx®; TX10; 80mm
Type of tool: screwdriver
Kind of bit: Torx®
Bit size: TX10
Blade length: 80mm
Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle
Handle material: polypropylene
кількість в упаковці: 1 шт
Category: Screwdrivers
Description: Screwdriver; Torx®; TX10; 80mm
Type of tool: screwdriver
Kind of bit: Torx®
Bit size: TX10
Blade length: 80mm
Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle
Handle material: polypropylene
кількість в упаковці: 1 шт
на замовлення 16 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
2+ | 169.9 грн |
3+ | 134.51 грн |
9+ | 113.75 грн |
24+ | 107.11 грн |
TG-215 |
Виробник: GOLDTOOL
TG-215 Screwdrivers
TG-215 Screwdrivers
на замовлення 13 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
2+ | 221.76 грн |
8+ | 135.34 грн |
20+ | 127.87 грн |
TG-220 |
Виробник: GOLDTOOL
TG-220 Screwdrivers
TG-220 Screwdrivers
на замовлення 168 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
2+ | 211.03 грн |
7+ | 152.78 грн |
10+ | 144 грн |
TG-30 |
Виробник: GOLDTOOL
TG-30 Screwdrivers
TG-30 Screwdrivers
на замовлення 143 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
2+ | 182.42 грн |
8+ | 127.04 грн |
10+ | 123.3 грн |
21+ | 119.57 грн |
TG-31 |
Виробник: GOLDTOOL
TG-31 Screwdrivers
TG-31 Screwdrivers
на замовлення 116 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
2+ | 157.38 грн |
9+ | 120.4 грн |
10+ | 113.82 грн |
23+ | 113.75 грн |
TG-42 |
Виробник: GOLDTOOL
Category: Screwdrivers
Description: Screwdriver; Phillips; PH2; 100mm
Type of tool: screwdriver
Kind of bit: Phillips
Bit size: PH2
Blade length: 100mm
Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle
Handle material: polypropylene
кількість в упаковці: 1 шт
Category: Screwdrivers
Description: Screwdriver; Phillips; PH2; 100mm
Type of tool: screwdriver
Kind of bit: Phillips
Bit size: PH2
Blade length: 100mm
Screwdriver features: anti-slip handle; black finished blade tip; chrome plated blade; coloured handle facilitates the identification of tip form; ergonomic handle; handle has a suspension hole; hardened blade; two-component handle
Handle material: polypropylene
кількість в упаковці: 1 шт
на замовлення 37 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
2+ | 260.21 грн |
3+ | 204.36 грн |
6+ | 166.06 грн |
17+ | 156.93 грн |
THR-001 |
Виробник: GOLDTOOL
Category: Reamers
Description: Taper reamer; Tool length: 125mm; Working part len: 80mm
Tools features: cylindrical grip, diameter 12.2 mm, with hole for cotter; designed for continuous enlarging of hole diameters; enlarging of hole diameters in metal and plastic elements
Tool length: 125mm
Working part length: 80mm
Reamed hole diameter: 3.5...12.5mm
Type of tool: Taper reamer
Category: Reamers
Description: Taper reamer; Tool length: 125mm; Working part len: 80mm
Tools features: cylindrical grip, diameter 12.2 mm, with hole for cotter; designed for continuous enlarging of hole diameters; enlarging of hole diameters in metal and plastic elements
Tool length: 125mm
Working part length: 80mm
Reamed hole diameter: 3.5...12.5mm
Type of tool: Taper reamer
на замовлення 15 шт:
термін постачання 21-30 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 499.26 грн |
3+ | 309.99 грн |
7+ | 293.38 грн |
THR-066 |
Виробник: GOLDTOOL
Category: General Purpose Tools - Others
Description: Oiler; Tank capacity: 5ml; 140mm; aluminium
Type of tool: oiler
Tank capacity: 5ml
Length: 140mm
Material: aluminium
Colour: silver
Category: General Purpose Tools - Others
Description: Oiler; Tank capacity: 5ml; 140mm; aluminium
Type of tool: oiler
Tank capacity: 5ml
Length: 140mm
Material: aluminium
Colour: silver
на замовлення 1 шт:
термін постачання 21-30 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 661.7 грн |
THR-075 |
Виробник: GOLDTOOL
Category: General Purpose Tools - Others
Description: Scriber; Ø: 2mm; L: 148mm; stainless steel
Length: 148mm
Diameter: 2mm
Material: stainless steel
Tools features: automatic pulling out; pen-like body
Type of tool: scriber
Category: General Purpose Tools - Others
Description: Scriber; Ø: 2mm; L: 148mm; stainless steel
Length: 148mm
Diameter: 2mm
Material: stainless steel
Tools features: automatic pulling out; pen-like body
Type of tool: scriber
на замовлення 25 шт:
термін постачання 21-30 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 553.65 грн |
3+ | 381.95 грн |
5+ | 374.34 грн |
6+ | 361.19 грн |
THR-450 |
Виробник: GOLDTOOL
Category: General Purpose Tools - Others
Description: Engineer's scribers; 180mm; steel
Type of tool: engineer's scribers
Material: steel
Length: 180mm
Soldering equipment features: two tips, straight and right angle
Category: General Purpose Tools - Others
Description: Engineer's scribers; 180mm; steel
Type of tool: engineer's scribers
Material: steel
Length: 180mm
Soldering equipment features: two tips, straight and right angle
на замовлення 62 шт:
термін постачання 21-30 дні (днів)Кількість | Ціна без ПДВ |
---|---|
3+ | 139.08 грн |
5+ | 123.16 грн |
18+ | 117.63 грн |
THR-001 |
Виробник: GOLDTOOL
Category: Reamers
Description: Taper reamer; Tool length: 125mm; Working part len: 80mm
Tools features: cylindrical grip, diameter 12.2 mm, with hole for cotter; designed for continuous enlarging of hole diameters; enlarging of hole diameters in metal and plastic elements
Tool length: 125mm
Working part length: 80mm
Reamed hole diameter: 3.5...12.5mm
Type of tool: Taper reamer
Category: Reamers
Description: Taper reamer; Tool length: 125mm; Working part len: 80mm
Tools features: cylindrical grip, diameter 12.2 mm, with hole for cotter; designed for continuous enlarging of hole diameters; enlarging of hole diameters in metal and plastic elements
Tool length: 125mm
Working part length: 80mm
Reamed hole diameter: 3.5...12.5mm
Type of tool: Taper reamer
на замовлення 15 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 599.11 грн |
3+ | 386.29 грн |
7+ | 352.06 грн |
THR-062 |
Виробник: GOLDTOOL
GTR-062 General Purpose Tools - Others
GTR-062 General Purpose Tools - Others
на замовлення 94 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 829.81 грн |
2+ | 529.75 грн |
6+ | 500.68 грн |
THR-066 |
Виробник: GOLDTOOL
Category: General Purpose Tools - Others
Description: Oiler; Tank capacity: 5ml; 140mm; aluminium
Type of tool: oiler
Tank capacity: 5ml
Length: 140mm
Material: aluminium
Colour: silver
кількість в упаковці: 1 шт
Category: General Purpose Tools - Others
Description: Oiler; Tank capacity: 5ml; 140mm; aluminium
Type of tool: oiler
Tank capacity: 5ml
Length: 140mm
Material: aluminium
Colour: silver
кількість в упаковці: 1 шт
на замовлення 1 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 794.04 грн |
2+ | 655.32 грн |
3+ | 606.14 грн |
5+ | 596.17 грн |
THR-075 |
Виробник: GOLDTOOL
Category: General Purpose Tools - Others
Description: Scriber; Ø: 2mm; L: 148mm; stainless steel
Length: 148mm
Diameter: 2mm
Material: stainless steel
Tools features: automatic pulling out; pen-like body
Type of tool: scriber
кількість в упаковці: 1 шт
Category: General Purpose Tools - Others
Description: Scriber; Ø: 2mm; L: 148mm; stainless steel
Length: 148mm
Diameter: 2mm
Material: stainless steel
Tools features: automatic pulling out; pen-like body
Type of tool: scriber
кількість в упаковці: 1 шт
на замовлення 25 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 664.39 грн |
3+ | 475.97 грн |
5+ | 449.2 грн |
6+ | 433.43 грн |
THR-450 |
Виробник: GOLDTOOL
Category: General Purpose Tools - Others
Description: Engineer's scribers; 180mm; steel
Type of tool: engineer's scribers
Material: steel
Length: 180mm
Soldering equipment features: two tips, straight and right angle
кількість в упаковці: 1 шт
Category: General Purpose Tools - Others
Description: Engineer's scribers; 180mm; steel
Type of tool: engineer's scribers
Material: steel
Length: 180mm
Soldering equipment features: two tips, straight and right angle
кількість в упаковці: 1 шт
на замовлення 62 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
2+ | 219.08 грн |
3+ | 173.31 грн |
5+ | 147.8 грн |
18+ | 141.15 грн |
TO-SA11 |
Виробник: GOLDTOOL
Category: Various soldering tools
Description: Kit: scrapers and brushes; 180mm; 7pcs.
Type of tools set: scrapers and brushes
Tool length: 180mm
Quantity in set/package: 7pcs.
Standard equipment: 3 double sided tools for preparation and correction of soldered connections and for cleaning of PCBs after soldering; 100 ml container with dispenser for cleaning agents or flux; brush ESD; desoldering braid 2mm x 1,5m; pliers for heat dissipation while soldering, to prevent component overheating
Category: Various soldering tools
Description: Kit: scrapers and brushes; 180mm; 7pcs.
Type of tools set: scrapers and brushes
Tool length: 180mm
Quantity in set/package: 7pcs.
Standard equipment: 3 double sided tools for preparation and correction of soldered connections and for cleaning of PCBs after soldering; 100 ml container with dispenser for cleaning agents or flux; brush ESD; desoldering braid 2mm x 1,5m; pliers for heat dissipation while soldering, to prevent component overheating
на замовлення 89 шт:
термін постачання 21-30 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 880.78 грн |
2+ | 615.82 грн |
4+ | 581.92 грн |
TO-SA11 |
Виробник: GOLDTOOL
Category: Various soldering tools
Description: Kit: scrapers and brushes; 180mm; 7pcs.
Type of tools set: scrapers and brushes
Tool length: 180mm
Quantity in set/package: 7pcs.
Standard equipment: 3 double sided tools for preparation and correction of soldered connections and for cleaning of PCBs after soldering; 100 ml container with dispenser for cleaning agents or flux; brush ESD; desoldering braid 2mm x 1,5m; pliers for heat dissipation while soldering, to prevent component overheating
кількість в упаковці: 1 шт
Category: Various soldering tools
Description: Kit: scrapers and brushes; 180mm; 7pcs.
Type of tools set: scrapers and brushes
Tool length: 180mm
Quantity in set/package: 7pcs.
Standard equipment: 3 double sided tools for preparation and correction of soldered connections and for cleaning of PCBs after soldering; 100 ml container with dispenser for cleaning agents or flux; brush ESD; desoldering braid 2mm x 1,5m; pliers for heat dissipation while soldering, to prevent component overheating
кількість в упаковці: 1 шт
на замовлення 89 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 1056.94 грн |
2+ | 767.41 грн |
4+ | 698.3 грн |
TTK-055 |
Виробник: GOLDTOOL
Category: Strippers for wire & cable
Description: Stripping tool; Øcable: 0.26÷8mm; Wire: round,flat; 125mm; STP,UTP
Type of tool: stripping tool
Cable external diameter: 0.26...8mm
Kind of stripping wire: flat; round
Length: 125mm
Tool material: plastic
Stripping tool features: a tool structure enables fastening it as a self-locking clip; cutting blade position is adjustable; fitted with spare blades; insulation is cut after the tool rotates several times around the cable axis
Kind of wire: STP; UTP
Category: Strippers for wire & cable
Description: Stripping tool; Øcable: 0.26÷8mm; Wire: round,flat; 125mm; STP,UTP
Type of tool: stripping tool
Cable external diameter: 0.26...8mm
Kind of stripping wire: flat; round
Length: 125mm
Tool material: plastic
Stripping tool features: a tool structure enables fastening it as a self-locking clip; cutting blade position is adjustable; fitted with spare blades; insulation is cut after the tool rotates several times around the cable axis
Kind of wire: STP; UTP
на замовлення 22 шт:
термін постачання 21-30 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 873.33 грн |
2+ | 563.24 грн |
4+ | 532.79 грн |
TTK-453 |
Виробник: GOLDTOOL
Category: Crimping Tools for Terminals
Description: Tool: for crimping; insulated connectors,insulated terminals
Length: 0.25m
Wire cross-section: 0.5...6mm2
Wire size: 20AWG...10AWG
Type of tool: for crimping
Crimp tool application: insulated connectors; insulated terminals
Crimp tool features: elongated handles enable operation with both hands; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Category: Crimping Tools for Terminals
Description: Tool: for crimping; insulated connectors,insulated terminals
Length: 0.25m
Wire cross-section: 0.5...6mm2
Wire size: 20AWG...10AWG
Type of tool: for crimping
Crimp tool application: insulated connectors; insulated terminals
Crimp tool features: elongated handles enable operation with both hands; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
на замовлення 16 шт:
термін постачання 21-30 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 2078.25 грн |
2+ | 1824.63 грн |
TTK-468 |
Виробник: GOLDTOOL
Category: Crimping Tools for RJ Plugs
Description: Tool: for crimping
Type of tool: for crimping
Length: 195mm
Crimp tool application: RJ9 (4p4c) connectors; RJ11 (6p4c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors
Tool material: steel
Crimp tool features: 3 interchangeable crimping dies; blackened tool; cable cutting and stripping; ergonomic pads on handles; fitted with return spring; fitted with stripped insulation distance limiter and blade protection; jaw opening interlock
Category: Crimping Tools for RJ Plugs
Description: Tool: for crimping
Type of tool: for crimping
Length: 195mm
Crimp tool application: RJ9 (4p4c) connectors; RJ11 (6p4c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors
Tool material: steel
Crimp tool features: 3 interchangeable crimping dies; blackened tool; cable cutting and stripping; ergonomic pads on handles; fitted with return spring; fitted with stripped insulation distance limiter and blade protection; jaw opening interlock
на замовлення 22 шт:
термін постачання 21-30 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 1688.54 грн |
2+ | 1482.13 грн |
5+ | 1448.22 грн |
TTK-508 |
Виробник: GOLDTOOL
Category: Crimping Tools for RJ Plugs
Description: Tool: for crimping
Type of tool: for crimping
Length: 0.2m
Crimp tool features: blackened tool; cutting and stripping flat cables; hardened tools; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Tool material: carbon steel
Crimp tool application: RJ11 (6p4c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors
Category: Crimping Tools for RJ Plugs
Description: Tool: for crimping
Type of tool: for crimping
Length: 0.2m
Crimp tool features: blackened tool; cutting and stripping flat cables; hardened tools; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Tool material: carbon steel
Crimp tool application: RJ11 (6p4c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors
на замовлення 65 шт:
термін постачання 21-30 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 1541.74 грн |
2+ | 1353.43 грн |
5+ | 1322.98 грн |
TTK-742 |
Виробник: GOLDTOOL
Category: Cutting Pliers
Description: Pliers; cutting; blackened tool,PVC coated handles; 230mm
Type of tool: pliers
Pliers length: 230mm
Kind of pliers: cutting
Cutting range: aluminium cable 70mm2; coper wire 16mm2; copper cable 70mm2
Oblique pliers/knives features: blackened tool; PVC coated handles
Pliers/knives application: for cutting large diameter copper and aluminium cables
Category: Cutting Pliers
Description: Pliers; cutting; blackened tool,PVC coated handles; 230mm
Type of tool: pliers
Pliers length: 230mm
Kind of pliers: cutting
Cutting range: aluminium cable 70mm2; coper wire 16mm2; copper cable 70mm2
Oblique pliers/knives features: blackened tool; PVC coated handles
Pliers/knives application: for cutting large diameter copper and aluminium cables
на замовлення 6 шт:
термін постачання 21-30 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 1111.04 грн |
3+ | 974.94 грн |
TTK-055 |
Виробник: GOLDTOOL
Category: Strippers for wire & cable
Description: Stripping tool; Øcable: 0.26÷8mm; Wire: round,flat; 125mm; STP,UTP
Type of tool: stripping tool
Cable external diameter: 0.26...8mm
Kind of stripping wire: flat; round
Length: 125mm
Tool material: plastic
Stripping tool features: a tool structure enables fastening it as a self-locking clip; cutting blade position is adjustable; fitted with spare blades; insulation is cut after the tool rotates several times around the cable axis
Kind of wire: STP; UTP
Category: Strippers for wire & cable
Description: Stripping tool; Øcable: 0.26÷8mm; Wire: round,flat; 125mm; STP,UTP
Type of tool: stripping tool
Cable external diameter: 0.26...8mm
Kind of stripping wire: flat; round
Length: 125mm
Tool material: plastic
Stripping tool features: a tool structure enables fastening it as a self-locking clip; cutting blade position is adjustable; fitted with spare blades; insulation is cut after the tool rotates several times around the cable axis
Kind of wire: STP; UTP
на замовлення 22 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 1047.99 грн |
2+ | 701.88 грн |
4+ | 639.35 грн |
TTK-453 |
Виробник: GOLDTOOL
Category: Crimping Tools for Terminals
Description: Tool: for crimping; insulated connectors,insulated terminals
Length: 0.25m
Wire cross-section: 0.5...6mm2
Wire size: 20AWG...10AWG
Type of tool: for crimping
Crimp tool application: insulated connectors; insulated terminals
Crimp tool features: elongated handles enable operation with both hands; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
кількість в упаковці: 1 шт
Category: Crimping Tools for Terminals
Description: Tool: for crimping; insulated connectors,insulated terminals
Length: 0.25m
Wire cross-section: 0.5...6mm2
Wire size: 20AWG...10AWG
Type of tool: for crimping
Crimp tool application: insulated connectors; insulated terminals
Crimp tool features: elongated handles enable operation with both hands; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
кількість в упаковці: 1 шт
на замовлення 16 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 2493.91 грн |
2+ | 2273.77 грн |
TTK-468 |
Виробник: GOLDTOOL
Category: Crimping Tools for RJ Plugs
Description: Tool: for crimping
Type of tool: for crimping
Length: 195mm
Crimp tool application: RJ9 (4p4c) connectors; RJ11 (6p4c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors
Tool material: steel
Crimp tool features: 3 interchangeable crimping dies; blackened tool; cable cutting and stripping; ergonomic pads on handles; fitted with return spring; fitted with stripped insulation distance limiter and blade protection; jaw opening interlock
кількість в упаковці: 1 шт
Category: Crimping Tools for RJ Plugs
Description: Tool: for crimping
Type of tool: for crimping
Length: 195mm
Crimp tool application: RJ9 (4p4c) connectors; RJ11 (6p4c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors
Tool material: steel
Crimp tool features: 3 interchangeable crimping dies; blackened tool; cable cutting and stripping; ergonomic pads on handles; fitted with return spring; fitted with stripped insulation distance limiter and blade protection; jaw opening interlock
кількість в упаковці: 1 шт
на замовлення 22 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 2026.24 грн |
2+ | 1846.96 грн |
5+ | 1737.87 грн |
TTK-508 |
Виробник: GOLDTOOL
Category: Crimping Tools for RJ Plugs
Description: Tool: for crimping
Type of tool: for crimping
Length: 0.2m
Crimp tool features: blackened tool; cutting and stripping flat cables; hardened tools; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Tool material: carbon steel
Crimp tool application: RJ11 (6p4c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors
кількість в упаковці: 1 шт
Category: Crimping Tools for RJ Plugs
Description: Tool: for crimping
Type of tool: for crimping
Length: 0.2m
Crimp tool features: blackened tool; cutting and stripping flat cables; hardened tools; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Tool material: carbon steel
Crimp tool application: RJ11 (6p4c) connectors; RJ12 (6p6c) connectors; RJ45 (8p8c) connectors
кількість в упаковці: 1 шт
на замовлення 65 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 1850.09 грн |
2+ | 1686.58 грн |
5+ | 1587.58 грн |
TTK-742 |
Виробник: GOLDTOOL
Category: Cutting Pliers
Description: Pliers; cutting; blackened tool,PVC coated handles; 230mm
Type of tool: pliers
Pliers length: 230mm
Kind of pliers: cutting
Cutting range: aluminium cable 70mm2; coper wire 16mm2; copper cable 70mm2
Oblique pliers/knives features: blackened tool; PVC coated handles
Pliers/knives application: for cutting large diameter copper and aluminium cables
кількість в упаковці: 1 шт
Category: Cutting Pliers
Description: Pliers; cutting; blackened tool,PVC coated handles; 230mm
Type of tool: pliers
Pliers length: 230mm
Kind of pliers: cutting
Cutting range: aluminium cable 70mm2; coper wire 16mm2; copper cable 70mm2
Oblique pliers/knives features: blackened tool; PVC coated handles
Pliers/knives application: for cutting large diameter copper and aluminium cables
кількість в упаковці: 1 шт
на замовлення 6 шт:
термін постачання 7-14 дні (днів)Кількість | Ціна без ПДВ |
---|---|
1+ | 1333.24 грн |
3+ | 1214.92 грн |
Бокорізи GTH-155 (GPL-155) Код товару: 118132 |
Виробник: GOLDTOOL
Інструмент > Бокорізи, кусачки, кліщі, щипці, плоскогубці, круглогубці, пасатижі, затискачі
Тип: Бокорізи, кусачки
Опис: Щипці Бокорізи, для різання, довжина інструмента: 125мм, матеріал: сталь, діапазон різання: дроти 0,08-1,2мм, губки шліфовані, різко звужуються, без фаски, поворотна пружина, застосовуються для прецизійних робіт в електроніці та електротехніці
Інструмент > Бокорізи, кусачки, кліщі, щипці, плоскогубці, круглогубці, пасатижі, затискачі
Тип: Бокорізи, кусачки
Опис: Щипці Бокорізи, для різання, довжина інструмента: 125мм, матеріал: сталь, діапазон різання: дроти 0,08-1,2мм, губки шліфовані, різко звужуються, без фаски, поворотна пружина, застосовуються для прецизійних робіт в електроніці та електротехніці
у наявності: 40 шт
Кількість | Ціна без ПДВ |
---|---|
1+ | 540 грн |
Бокорезы GTH-231 Код товару: 118133 |
Виробник: GOLDTOOL
Інструмент > Бокорізи, кусачки, кліщі, щипці, плоскогубці, круглогубці, пасатижі, затискачі
Тип: Бокорезы, кусачки
Опис: Щипцы бокорезы, для резки, длина инструмента: 115мм, материал: сталь, диапазон резки: медная проволока, алюминиевая и проволока из мягкой стали диаметром до 1,2мм, овальные губки, режущие кромки с фаской
Інструмент > Бокорізи, кусачки, кліщі, щипці, плоскогубці, круглогубці, пасатижі, затискачі
Тип: Бокорезы, кусачки
Опис: Щипцы бокорезы, для резки, длина инструмента: 115мм, материал: сталь, диапазон резки: медная проволока, алюминиевая и проволока из мягкой стали диаметром до 1,2мм, овальные губки, режущие кромки с фаской
товар відсутній
Зачистка изоляции (стиппер) GT-055 Код товару: 117968 |
Виробник: GOLDTOOL
Інструмент > Інструмент для зачистки та обрізки кабелю
Тип: Для зачистки
Опис: Стриппер, вид зачищаемого провода: круглый, плоский, диаметр провода: 0.26...8мм, вид кабеля: STP, UTP, материал: пластмасса
Інструмент > Інструмент для зачистки та обрізки кабелю
Тип: Для зачистки
Опис: Стриппер, вид зачищаемого провода: круглый, плоский, диаметр провода: 0.26...8мм, вид кабеля: STP, UTP, материал: пластмасса
товар відсутній
Щипцы-круглогубцы GTH-193 Код товару: 117915 |
Виробник: GOLDTOOL
Інструмент > Бокорізи, кусачки, кліщі, щипці, плоскогубці, круглогубці, пасатижі, затискачі
Тип: Щипцы-круглогубцы
Опис: Щипцы-круглогубцы, с удлиненными губками, длина инструмента: 140мм, длина рабочей части: 35мм, гладкие зажимные поверхности, возвратная пружина
Інструмент > Бокорізи, кусачки, кліщі, щипці, плоскогубці, круглогубці, пасатижі, затискачі
Тип: Щипцы-круглогубцы
Опис: Щипцы-круглогубцы, с удлиненными губками, длина инструмента: 140мм, длина рабочей части: 35мм, гладкие зажимные поверхности, возвратная пружина
товар відсутній
Щипцы-круглогубцы GTH-262 Код товару: 117916 |
Виробник: GOLDTOOL
Інструмент > Бокорізи, кусачки, кліщі, щипці, плоскогубці, круглогубці, пасатижі, затискачі
Тип: Щипцы-круглогубцы
Опис: Щипцы-круглогубцы, длина инструмента: 140мм, для захвата и резки, прецизионные, зажимные поверхности с поперечным рифлением, возвратная пружина
Інструмент > Бокорізи, кусачки, кліщі, щипці, плоскогубці, круглогубці, пасатижі, затискачі
Тип: Щипцы-круглогубцы
Опис: Щипцы-круглогубцы, длина инструмента: 140мм, для захвата и резки, прецизионные, зажимные поверхности с поперечным рифлением, возвратная пружина
товар відсутній