на замовлення 35 шт:
термін постачання 21-30 дні (днів)
Кількість | Ціна без ПДВ |
---|---|
1+ | 15208.73 грн |
5+ | 14118.54 грн |
25+ | 12036.46 грн |
Відгуки про товар
Написати відгук
Технічний опис 9012500000 Weidmuller
Category: Crimping Tools for Terminals, Description: Tool: for crimping; insulated solder sleeves; 0.5÷4mm2; 200mm, Type of tool: for crimping, Crimp tool application: insulated solder sleeves; non-insulated solder sleeves, Wire cross-section: 0.5...4mm2, Die shape: trapeze, Crimp tool features: blackened tool; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle, Tool material: steel, Tool length: 200mm.
Інші пропозиції 9012500000 за ціною від 12872.76 грн до 15770.7 грн
Фото | Назва | Виробник | Інформація |
Доступність |
Ціна без ПДВ | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
9012500000 | Виробник : Weidmüller |
Description: TOOL HAND CRIMPER 12-20AWG SIDE Packaging: Bulk For Use With/Related Products: Ferrules Tool Type: Hand Crimper Wire Gauge or Range - AWG: 12-20 AWG Part Status: Active Tool Method: Manual Ratcheting: Ratchet Wire Entry Location: Side Entry |
на замовлення 164 шт: термін постачання 21-31 дні (днів) |
|
|||||||||||
9012500000 | Виробник : WEIDMЬLLER | WDM-PZ4 Crimping Tools for Terminals |
на замовлення 3 шт: термін постачання 7-14 дні (днів) |
|
|||||||||||
9012500000 | Виробник : Weidmuller | Crimping Tool For Wire End Ferrules, Crimping Range 0.5 4mm Square , Trapeze Crimp |
товар відсутній |
||||||||||||
9012500000 | Виробник : WEIDMÜLLER |
Category: Crimping Tools for Terminals Description: Tool: for crimping; insulated solder sleeves; 0.5÷4mm2; 200mm Type of tool: for crimping Crimp tool application: insulated solder sleeves; non-insulated solder sleeves Wire cross-section: 0.5...4mm2 Die shape: trapeze Crimp tool features: blackened tool; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle Tool material: steel Tool length: 200mm |
товар відсутній |